We are a leading distributor of tractor mounted forestry equipment in North America. Products Include Tractor mounted skidding winches and wood chippers.  Log loaders, grapples, rotators and forwarders.   For more information on these products, click the Northeast Implement link below.

Northeast Implement Corporate Home Page

Agric Tiller PTO shafts          

Fransgard Norse Igland Tajfun   Winch PTO Replacements

Woodchipper Replacements

PTO shafts for Farmi winches

Tiller Blades

LogMatic Wedge Axe

How to order

Home

The following chart gives you the industry standard for PTO driveline horepower ratings.  Please keep in mind these are rated horsepower at the PTO, not engine horsepower.  Many times the difference between engine horsepower and PTO horsepower can vary as much as 10%.  These values give the maximum recommended horsepower that can be transferred through the drivelive from the tractor to the implement.

If you are not sure how how far you can safely extend a driveline, the following chart give the recommended maximum extension available on each series of shaft with a minimum collapsed lenth listed.  In most cases, it is recommended that the driveline does not extend 1/2 of its' collapsed length.  This means the driveline tubes should should overlap at least 1/2 for safe operation at all speeds.

For More information, contact us at info@northeastimplement.com                

For ordering information, Click Here